Unverified until you check the plate or the operator’s manual.
Nothing logged yet. First oil change goes here.
| Engine | 42 cc 2-cycle gasoline, occasional-use homeowner saw Unverified Edit |
|---|---|
| Typical bar | 18 in (also listed with 16 in on some kits) Unverified Edit |
| Chain | 3/8 in low-profile pitch, 0.050 in gauge Unverified Edit |
| PP4218 bar / chain P/N | Bar 952044926 · chain 952051548 Unverified Edit |
| Fuel mix (PP4218 manual) | 40:1 — 3.2 oz synthetic 2-cycle oil per 1 gal unleaded, 89+ octane, max 10% ethanol Unverified Edit |
| Later PR4218 mix | 50:1 — 2.6 oz per gallon if the saw or oil bottle says 50:1 Unverified Edit |
| Spark plug | Champion RCJ-7Y, gap 0.025 in (0.6 mm); 3/4 in socket; replace yearly Unverified Edit |
| Bar / chain oil | Dedicated bar-and-chain oil (or SAE 30). Never waste oil. Thin 5–10% with #1 diesel/kerosene in freeze. Unverified Edit |
| Oiler | Automatic — keep the oil tank full or the bar/chain dies fast Unverified Edit |
| Safety | Inertia chain brake; chain must not move at idle Unverified Edit |
Unverified numbers until you match them to this machine.
| Item | Part |
|---|---|
| Spark plug Gap 0.025 in; NGK BPMR7A on some diagrams Unverified Edit | Champion RCJ-7Y (952030150) |
| Air filter PP4218 Type 1/2; AV variants sometimes 530057869 — match the housing Unverified Edit | 530057925 |
| Primer bulb Snap-in Unverified Edit | 530047721 |
| Fuel filter (in tank) Unverified Edit | 530095646 |
| Fuel line kit (small) Unverified Edit | 530069247 |
| Carburetor Confirm on the carb stamp Unverified Edit | Zama W-26 · 545070601 (replaces 530035590) |
| 18 in bar OEM; many are NLA — match length/mount Unverified Edit | 952044926 |
| 18 in chain 3/8 LP, .050; count drive links before ordering Unverified Edit | 952051548 |
| 2-cycle oil 40:1 unless the saw says 50:1 Unverified Edit | ISO-L-EGD / JASO FD synthetic |
| Bar oil Not motor oil from the Camry Unverified Edit | Poulan Pro bar and chain oil |
No notes yet.